Cressi Atelier Cressi Atelier

PLASMA SHAFT Novedad

4 - 1Ver otros varillas : Varilla INOX CON ROSCA 6.5mmVer otros varillas :  VARILLA PLASMA DE TETONES
  • Enviar página a un amigo
  • Compartir en Facebook
  • Imprimir
  • Spanish
  • Italian
prev
next

Realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms.

Mechanized made with useful stainless hard metal to avoid the pollution of the material of the shaft and possible points of oxide of the mechanized zones.

SANDVIK steel hardened externally through an exclusive plasmatic vacuum process in high temperatures. This process makes the external part to have a hardness about 60 HRC without harming the resistance to the flexion of the shaft.

Process of very strict control (shaft by shaft before to the mechanizing) to verify the perfect straightness of the shaft.

Flap in stainless steel of wharf AISI 301 of 0,8 mm thickness. Mechanical resistance 1269 Nw/mm2 near to the one of the shaft. Pin and orifice provided to the diameter of the shaft between 2 and 2,5 mm. Length in proportion to the shaft; 55 mm in measures from 90 to 120 cm and 70 mm from 130 to 150 cm. Flap of two volumes, studied for the maximum hydrodynamics. Assembly with one light reducing of 1 cm of length that integrates in the profile the rivets and improves notably the scope of the shaft. The reducing does not suppose wastage of resistance since the pin of fin is provided according to the diameter of the shaft. O-ring of enclosure of the flap included (red color).

Adjustment of the wishbone reinforced with curved radius of mechanization that make the break of the shaft almost impossible for this traditionally weak point. Polyvalent design for metallic wishbone and of Dyneema (we recommend polished of the profiles with cable of steel for this use). Its design together with the used parameters for the tempering, obtains an extraordinary resistance to the break in sense of opening of fit of 190 Nw and 40 º of angle.

Top format wishbone specially resistant and of great penetration.

Available diameters: Ø6,25 mm and Ø6,70 mm.

Measures: 90, 105, 110, 115, 120, 125, 130, 135, 140, 150 cm (according to each version).

Descriptive label in removable paper with indication of diameter, measure, reference, EAN and technical details.

 

CodeEANColour / Size
EFA 4120018435266974772?6,25mm 90cm (f. 55-60)
EFA 4120028435266974925?6,25mm 105cm (f. 75)
EFA 4120038435266974826?6,25mm 110cm (f. 75)
EFA 4120048435266974833?6,25mm 115cm (f. 75)
EFA 4120058435266981442?6,25mm 120cm (f. 84)
EFA 4120068435266974857?6,25mm 125cm (f. 84)
EFA 4120078435266977155?6,25mm 130cm (f. 85-90)
EFA 4120088435266977162?6,25mm 135cm (f. 85-90)
EFA 4120098435266977179?6,25mm 140cm (f. 95-100)
EFA 4125038435266985976?6,50mm 110cm (f.75)
EFA 4125048435266985983?6,50mm 115cm (f.75)
EFA 4125058435266985991?6,50mm 120cm (f.84)
EFA 4125068435266986003?6,50mm 125cm (f.84)
EFA 4125078435266986011?6,50mm 130cm (f. 85-90)
EFA 4125088435266986027?6,50mm 135cm (f.85-90)
EFA 4125098435266986034?6,50mm 140cm (f.95-100)
EFA 4130048435266977186?6,70mm 115cm (f. 75)
EFA 4130068435266974864?6,70mm 125cm (f. 84)
EFA 4130078435266974871?6,70mm 130cm (f. 85-90)
EFA 4130088435266974888?6,70mm 135cm (f. 85-90)
EFA 4130098435266974895?6,70mm 140cm (f. 95-100)
EFA 4130108435266974901?6,70mm 150cm (f. 105-110)
CRESSI-SUB ESPAÑA, S.A. • c/ Castellassa, 24 nave 3 (Polígono Can Petit) • 08227 Terrassa (Barcelona) • Tel. (34) 937841888 • Fax. (34) 937841155 • cressi@cressi.es